Door Handle Replacement
Door handles appear to be something minor however, if you don't like the way they look or are finding them difficult to use, it's worth replacing them. With some patience, you can get the new handle in no time.
Modern door handles are often equipped with cover plates which hide the screws, giving them a more attractive appearance. However, you'll have to attach them separately if your new handle doesn't already have them.
Removal of the old Handle
Door handles aren't just an essential for aesthetics of your home but they're also essential for security as they let you lock and unlock your door. But, over time your door handle can lose its grip, appear loose or start to look old and worn. This is a good indication that it's time to replace your door handle.
One of the first signs that your door handle requires replacing is if it's becoming difficult to operate. This is a serious problem as you will no longer be capable of locking or unlocking the door and put your family and yourself at risk.
Another reason to replace your door handle is if it's damaged or broken. A damaged or broken door handle can be very dangerous, especially if your children or elderly family members are unable to open it and could get trapped inside. It's easy to fix a damaged handle on a door.
Modern door handles are generally standard sizes and will fit any door. If you're not sure whether the new door handle you're buying will work, try removing the old one and measuring the holes in its housing. This will allow you to buy the right door handle.
It is easiest to remove the door handle by unscrewing it from the door. Usually, a screwdriver is used. However, some door handles have a cover plate that conceals the screws that mount them, so you'll need to pry off this to access the screws underneath. Once you've removed your old handle, make note of the way the spindle is connected to ensure that you can make sure it is aligned when you put in your new one.
Alternatively, you can remove the door handle by removing it from the latch mechanism. This is usually done with an screwdriver however you'll need to locate the small latch, which should be at the edge of the trim piece. After you have removed the latch, take off the handle and the strike plate. Then, remove the latch from the door's edge.
Take off the Strike Plate
You'll need to replace your latch plate after replacing the handle. It's the part that holds the hole through which the door's latch hooks in when the door closes. The new handles will have two latch plates: a rectangular and circular plate (see the diagram above which illustrates the components of the door handle). If you have an rectangular latch plate, replace it with a round one. This will let the latch hook into the strike plate and make the handle easier.
The first step is to loosen the screw that's holding the latch plate that was previously in place. These screws can be quite tight, and will require some force to loosen. It is helpful to have a second person help with this part if possible.
The latch plate should be removed from the door once the screws have been removed. If the latch plate is stuck or doesn't move use a small file to scrape the edges. This can sometimes free up the plate.
Now you can prepare the new strike plate to be installed. Utilizing the wood screws that came with the new handles, screw the latch plate to the inside of the doorjamb. Don't over tighten your screws as this could damage the strike plate.
If you are not sure whether the latch plate is in its correct position, shut and then open the door to check if it latches and closes properly. If not, you will need to adjust the strikeplate up or down, or forward or back until the door shuts correctly.
If the door still moves or jiggles, you may have to enlarge your latch hole on the strike plate. This is more prevalent with older doors, but could be due to wear and tear hinge mortises that are too shallow or are not sized correctly for the latch, or because of damage or a broken strike plate that is damaged or broken. If this is the case then you should use a filing made of metal instead of a chisel, or hammer to adjust the strike plate.
Remove the Latch
The latch is a curved metal piece that slides in and out of a hole on the inside of your door. The latch moves forward when you turn the handle. It also catches the door frame so that the door stays closed. If www.repairmywindowsanddoors.co.uk wobbles when you close, an upgrade to the latch could be all that is needed to fix the problem.
It's hard to see the screws that secure the latch to the door, however there's usually a small slot on the trim plate that lets you to insert a screwdriver in order to remove it. Once you've removed the trim plate, it'll be simple to remove the latch as well as the remaining bolts that hold the spindle and latch in the position.
If the latch cannot be easily removed, use a paperclip or tool to remove it from the handle mechanism. Insert the item into the recessed latch slot and gently move it around until you feel the handle and latch begin to split. It is possible to repeat this process several times before you are able to take the latch off.
Once the old latch is removed, you should be able to slide the new latch into the slot without any difficulties. Use the new screws to connect the latch to the strike plate or door frame. Make sure it is properly positioned in the slot and aligned with the screw chambers.
Before installing the new handle, be sure to measure your current backset (the distance from the centre of the large hole on the front of the door to the edge). Make sure that the size of the latch of the new handle is equal to the measurement.
If you're replacing the handle or latch or handle, or if your previous lock cylinder has been damaged, then you'll need an entirely new one. If you're not switching locks, a new lock should fit in your existing recess and will work with your current keys. Make sure you select an entry point with a rectangular cover plate that match the handles you have.
Then remove the Cover Plate
You can replace your door handles with a modern lever and rose design to improve the look of your home. You can purchase complete sets of escutcheons, privacy adaptors, escutcheons, and escutcheons.
To replace the door handle inside, remove the cover plate (or rose), which protects the screws and the inner mechanism. Use a flathead to remove the cover plate. It could have an opening along one side or be held in place by a pin.
When the cover plate is off, remove the screw that holds the inside handle in place and put it aside. You'll also want to remove the screws that hold the latch and inner plates and the latch plate, which can be done by loosening them with a Philips screwdriver. Then, you can remove the outer plates and latch plate from the door and put them aside.
Most doors have a gap between the jamb of the door and the edge of the frame, which allows for a handle, however not all do. If yours doesn't allow for a handle, you'll have to drill a new hole in the door. The process for doing this is similar to the procedure opening a door using locks, but you'll be taking extra care not to damage the frame or door.
Installing new door knob screws is necessary after the holes have been drilled. Choose the same size as your old screws to prevent getting a handle too tight or loose. Installing a new latch and strike rod is also mandatory. These aren't included in the majority of door handle sets.
Amazon's Choice FAERSI 2-piece chrome finish handle sets are a fantastic option if you're in need of a premium interior door handle replacement set. It is a factory-fit and has received hundreds five-star reviews. It's an excellent option to replace worn or damaged interior door hardware on your Chevy.